News Details


Daily maintenance tips of drilling milling machine manufacturers china

2021-11-17


How much do you know about daily maintenance knowledge of drilling milling machine Manufacturers china? Let's take a look at it briefly!
1. Clean the exterior and dead corners of the machine tool, dismantle and wash the covers, and require clean inside and outside, no rust, no yellow robe, the paint sees the original color and the iron is bright. Clean the guide rail surface and remove the burrs on the work surface. Check the complement of screws, handball, and hand plate, and check the flexibility and reliability of each handle.
2. Maintenance of the spindle feed box: check the oil quality and keep it in good condition, and the oil quantity meets the requirements. Remove the burrs on the spindle taper hole. Clean the hydraulic transmission system, the oil filter, and adjust the oil pressure.
3. Drilling milling machine Manufacturers china rocker arm and lifting clamping mechanism inspection: check and adjust the lifting mechanism and clamping mechanism to achieve sensitivity and reliability.
4. Inspection of the lubrication system of drilling milling machine Manufacturers china: To clean the linoleum, it is required that the oil cup is complete, the oil path is unobstructed, and the oil window is bright.
5. Drilling milling machine Manufacturers china cooling system inspection: clean the cooling pump, filter and coolant tank. Check the coolant pipeline to ensure that there is no water leakage.
The above is a brief introduction to the daily maintenance of drilling milling machine Manufacturers china.

Contact us

Dalian Haidi Machinery Co.,Ltd

Address:No.9 Haifu road,

Bonded area,Dalian,China
Telephone: 86-18841132208 
E-mail: info@haidimachine.cn
Website: http://www.dlhaidi.cn

Copyright © 2018 Dalian Haidi Machinery Co.,Ltd.